Opens in a new tab

Technical Olympiad

Technology is not just about counting examples or describing machines. Show your ingenuity and make your own machine. The best solvers will advance to the regional round and all those who submit their solutions and apply to our school will receive extra points for admissions.

Most of the competitors who applied to our school in previous years were actually accepted.

 

 

Set of problems for the 5th year of the Technical Olympiad

From us, you’ll get

 

motor with a shaft | gear wheels and shafts | buttons and a switch | a red and a green LED with a resistor | fasteners and wires.

 

You can also use

 

4.5V batteries | wires | wooden skewers/plastic or metal rods | shafts (plastic/wooden), spools (thread spools, etc.) | anything you think might be suitable for the task.

 

What is not allowed

 

use pre-assembled kit parts in accordance with the instructions, complete machines, commercial products, etc.

How drawbridge signalling systems work | physics and practical activities textbooks for primary school, or other specialist literature | internet search engine | video portal (YouTube, Vimeo, …).

which will make it possible to combine boat trips with cars. The problem may have more than one solution.

 

  1. The bridge must be at least 20 cm long and a boat at least 10 cm high must be able to pass underneath it,
  2. The bridge must be able to support at least one toy car (any one you have that is larger than 5 cm),
  3. The bridge must be in its standard position for road traffic
  4. Once the switch has been activated, the bridge must change position to allow ships to pass freely (by raising or rotating),
  5. using the same or a different switch, the bridge returns to its original position,
  6. Both the open and closed states must be indicated by LEDs (red, green).

 

Bonus

A bridge may be fitted with a device that prevents it from moving when it is under load, or a signal that sounds when the bridge is opened.

What we expect

 

  • interesting technical solutions – there are no limits to the imagination,
  • a short, concise video (ideally 1 minute long) showing the result of your work,
  • justification of the components used and their specifications (text not exceeding one page) in the solution, including photographs
    the design solution for the task (structure, signalling solution).

 

What we will be assessing

  • functionality of the chosen solution – opening and closing the bridge, operation of the signalling system,
  • the reliability of the signalling equipment,
  • technical design,
  • the originality of the design,
  • the design of the final solution,
  • installation of traffic signals and the transition between waterborne and road transport,
  • video editing + explanation and justification of the proposed solution.

 

Presentation

 

Record a video showing your result and take a photo of it (for example, using a mobile phone; the video should ideally be 1 minute long).

Reasons for using the components in question – text limited to one page.

You can download the leaflet for the Year 5 Technical Olympiad here.

tachnicka olympiada lod - Technická olympiáda

 

You can collect the components for the TO project during the Open Days, or by arrangement during the secretariat’s office hours. The deadline for collecting the components is 29 January 2027.

 

It will take us some time to mark the TO; the results will be published on our website. If you are submitting an application to us, please include details of your participation in the TO on the application form. We will automatically award you the points. The top performers will progress to the regional round.

 

The deadline for submission is 14 February 2027.

 

Thank you to everyone involved in this year's event - there were almost 100 of you this year! Each participant is sent a certificate of participation with the number of points by e-mail.

If you have applied to study, you will be credited with points automatically. Applicants can also view their scores on Admissions Results page.

The winning video and the attached documents can be viewed below:

 

 

Attached documents:

 

Technical Olympiad 2025-26 winning solution

Technical Olympiad 2025-26 scheme

The Technical Olympiad is a competition designed for those primary school pupils who enjoy technology. Through simple tasks we want to show that technology is interesting, meaningful and allows self-realization. The aim of this competition is not to count or describe machines, but to make your own machine. Each task has a simple assignment and it is up to the contestants how they solve it. The best solvers will advance to the regional round, and all those who submit their solutions and apply to our school will receive extra points in the admissions process.

 

We cooperate with Department of Applied Physics and Technology University of South Bohemia and supports us and South Bohemia region a CEZ Group.

 

Every point counts in the admissions process!

 

This year's round of the Technical Olympiad has been concluded and the evaluation is underway. Thank you all for your participation!

TECHNICAL OLYMPIDE - how is it going?

 

  • When evaluating the results of the admission procedure, the headmaster takes into account, among other things, the applicant's fulfilment of the criteria, that demonstrate the applicant's suitable skills, knowledge and interests (according to § 60d of the Education Act).
  • We want take into account the interest in studying at our school (bonus for TO participants).

  • We brought a new competition in technical education promoting technology and technical thinking.

  • The TO assignment offers topics for teaching in primary school and for leisure clubs (inspiration).

  • The competition was also born out of the belief that even primary school pupils have the potential to create, discover and come up with original solutions.

The Technical Olympiad is based on several key principles that determine its specific character.

  • There is no predetermined solution to the challenges in the competition - any original work is welcome and judged as correct.
  • The assignment is deliberately conceived as loosely as possible to provide space for their own ideas and to encourage the self-fulfilment of the competitors.
  • The goal is to create your own functional product or machine, with the emphasis on the joy of discovery and creation.
  • The solution will be based on commonly available tools, or we will donate the necessary special equipment, such as motors, switches or prints from a 3D printer.
  • The competition is practically oriented - it does not require any calculations or complex theory. Participants submit a video and a short description of the solution.
  • The tasks are mainly in the fields of electrical and mechanical engineering, with an emphasis on the ability to apply knowledge in practice and find a functional technical solution.

 

Regional round

  • The regional round is organized by the Department of Physics, Chemistry and Technical Education of the Faculty of Education of the University of South Bohemia.
  • The best solvers of the home round (10) who managed to impress the jury with their ideas, execution and determination are invited to the regional round.
  • The task in the regional round is thematically related to the home round, but the competitors have limited time to build, improve or fine-tune their product.

Rating 

  • The jury evaluates not only the functionality of the resulting device, but also its technical design, creativity and the materials used, design and aesthetics, and last but not least the ability to present the idea - that is, concisely, clearly and with an emphasis on logical argumentation.
  • Competitors learn not only to create and invent, but also to communicate, respond to questions and defend their progress.
  • Success in the competition is not just about winning - the awards also come in the form of financial rewards and for the winners there is an experience for the whole class.
  • Respect and appreciation among classmates is also a significant value.
  • It is also gratifying that among the participants of the regional round there are also girls - they proved with their skill, creativity and determination that technology is definitely not just the domain of boys.

HOW TIME WENT - overview of the years

 

TO 00 1 - Technická olympiáda TO 00 2 - Technická olympiáda

TO 01 1 - Technická olympiáda TO 01 2 - Technická olympiáda

TO 02 1 - Technická olympiádaTO 02 2 - Technická olympiáda


 

TO 03 1 - Technická olympiáda TO 03 2 - Technická olympiáda


Check out the best solutions from the basic round of the 3rd year of the Technical Olympiad - what can the contestants build! HERE

 

Olympiada letak 148x210 3 Stranka 1 - Technická olympiáda

Olympiada letak 148x210 3 Stranka 2 - Technická olympiáda

Media image

 

A number of pupils who participated in the Technical Olympiad subsequently study at our school. What they have Memories for the Tech Olympics?

Pavel Kříž and Jaroslav Koreš spoke at the conference PF JU Kompas 2025 Technical Olympiad - the Olympiad in a different way. A recording of their presentation can be found at 🔗 YouTube channel of the Faculty of Education of the South Bohemian University.

The problems do not have a predetermined solution, so all solutions are correct. And we enjoy the creativity and correctness of the participants. And the best solution from 2025? You can find those on 🔗 YouTube channel of our school.

What can it look like in the final?

Related articles

All articles

Our partners

en_GBEnglish